[About]
This product comes as 1 set of candle holders. It's made of metal and glass, with a gorgeous gold color. Standing at an overall height of 50 inches, it has a base size of 11 inches by 11 inches. There are 10 stems and 10 glass shades. Each glass shade is 9.75 inches tall and 1.75 inches in diameter, while the metal candle holder base is 1.5 inches tall and 2 inches in diameter. It can hold taper, votive, pillar, or LED candles. The cylinder glass shades can easily slide over the candle holder base. Assembly is required.
[Information]
Additional Information: There are five types of stems (2 of each). Stem 1 has a height of 33.5 inches with the glass and 25 inches without, using 1 pole of 24 inches. Stem 2 has a height of 37.5 inches with the glass and 29 inches without, using 2 poles (4 inches and 24 inches) and 1 connector. Stem 3 has a height of 41 inches with the glass and 32.5 inches without, using 2 poles (8 inches and 24 inches) and 1 connector. Stem 4 has a height of 45 inches with the glass and 36.5 inches without, using 2 poles (12 inches and 24 inches) and 1 connector. Stem 5 has a height of 49 inches with the glass and 40 inches without, using 2 poles (16 inches and 24 inches) and 1 connector. Each stem and pole has a diameter of 0.5 inches and a thickness of 1mm. There are a total of 18 poles and 8 joint connectors which are 1 inch long, 0.5 inches in diameter, and 2mm thick. The candle holder base is 1.5 inches tall, 2 inches in diameter, and 1 inch deep. It comes with 4 pegs, each 0.5 inches in diameter.
Note: Most standard taper candlesticks in wax or LED will fit this centerpiece, but candles are not included.
How to Care:
Before first use, wash the glass pieces by hand in warm soapy water, rinse well, and dry with a lint-free cloth. For the best finish and clarity, clean with a 50/50 solution of vinegar and water, let it sit for a few hours, then rinse and dry. Since the glass is produced overseas in large quantities, clean all vases before use to remove dust. Do not clean the glass pieces in a dishwasher, and do not use the product in microwaves or conventional ovens.
This 10-arm gold cluster taper candle holder with clear glass shades is perfect for gatherings. To use it, first assemble all the parts according to the instructions. You can place taper, votive, pillar, or LED candles in the candle holder base. Slide the cylinder glass shades over the base. Most standard taper candlesticks in wax or LED will fit, but candles are not included. When it comes to maintenance, before using it for the first time, wash the glass pieces by hand in warm soapy water. Rinse them thoroughly and dry with a lint-free cloth. For better results, you can clean with a 50/50 solution of vinegar and water. Let it stand for a few hours, then rinse well and dry. Remember, because the glass is made overseas in large quantities, it's a good idea to clean all vases before use to get rid of any dust. Also, don't clean the glass pieces in a dishwasher and never use the product in microwaves or conventional ovens.
