[About]
This product is a single set of a stunning candle holder. It's crafted from a combination of metal and glass, with a beautiful gold finish. Standing at an overall height of 78 inches, it has a base size of 12 inches by 12 inches. There are 16 stems, each paired with a clear glass shade that measures 9.75 inches in height and 1.75 inches in diameter. The metal candle holder base is 1.5 inches high and 2 inches in diameter. It can hold taper, votive, pillar, or LED candles, and the cylinder glass shades easily slide over the base. Assembly is required.
[Information]
Additional Information:
There are different stem types with varying heights, both with and without the glass shades. The stems are made up of poles, and there are a total of 30 poles with different sizes. The outer edge has 12 tiers of poles with specific combinations. In the middle, there are 4 poles of the same height. The joint connectors have specific dimensions, and there are a total of 14 connectors. The candle holder base has a height of 1.5 inches, a diameter of 2 inches, and a depth of 1 inch. It comes with 4 pegs, each 0.5 inches in diameter.
Note: Most standard taper candlesticks in wax and LED will fit this centerpiece, but candles are not included.
How to Care:
Before first use, wash the glass pieces by hand in warm soapy water, rinse thoroughly, and dry with a lint-free cloth. For the best finish and clarity, clean with a 50/50 solution of vinegar and water, let it sit for a few hours, then rinse well and dry. All vases should be cleaned before use to remove dust or dirt due to transit and storage. Do not clean the glass pieces in a dishwasher, and do not use the product in microwaves or conventional ovens.
Using this candle holder is a great way to add a touch of elegance to your venue. First, you'll need to assemble it as per the instructions. Once assembled, you can place taper, votive, pillar, or LED candles in the cylinder candle holder base. Slide the clear glass shades over the base for a beautiful effect. Remember, most standard taper candlesticks in wax and LED will fit, but you'll need to provide your own candles. When it comes to maintenance, before the first use, wash the glass pieces by hand in warm soapy water. Rinse them well and dry with a lint-free cloth. For a better finish, you can use a 50/50 solution of vinegar and water. Let it sit for a few hours, then rinse and dry. Since the vases might have dust or dirt from transit and storage, always clean them before use. And please don't clean the glass pieces in a dishwasher or use the product in microwaves or conventional ovens.
